Sew Basics: Bias Tape (part 1)

I am so inspired by all of you that are new to sewing, getting back into sewing, or are thinking about buying a sewing machine to start sewing.  I love all the emails you have sent me and conversations we have had over on facebook.  I haven’t been the most consistent with my “Sew Basics” tutorials, but I’m going to try to put more of these together in hopes that you all will get as hooked on sewing as I am.

As most of you know, I am a self-taught sewer (well, mostly).  I’ve had a few lessons from my Grandma and grew up with my Mom sewing (though I never showed much interest).  Bias tape was very confusing to me when I first started sewing garments.  I couldn’t figure out which side was supposed to go where.  If any of you are like me, I hope this tutorial will help ease the confusion.

Here’s the plan for Sew Basics: Bias Tape

Part 1: Sewing bias tape to a garment
Part 2: Making your own bias tape from fabric

After part two, I will show you how to take your homemade bias tape and turn it into corded piping.

Let’s get started……..

Bias tape is a narrow piece of fabric that is cut on the bias (45 degree angle) which allows it to be stretchier and more fluid than fabric cut straight across.  Because of it’s stretchiness, bias tape works great for encasing raw curved edges and giving items a finished look.

Bias tape can be purchased in the notions section of your local fabric store.  You can usually find it near the zippers and ric-rac.  These days, most bias tape comes in basic, solid colors; however, you can find vintage bias tape (see above picture) in all sorts of different fun patterns.  To customize your own bias tape, you will need to make your own (we will discuss that in part 2).

There are two different types of bias tape that is made in varying widths – single-fold and double-fold.

Single-fold bias tape has two sides folded inwards (one fold is slightly larger than the other) and it is not folded down the center.  Double-fold bias tape is basically single-fold bias tape, but folded in half again lengthwise.  Double-fold will encase an entire raw edge with bias on either side of the raw edge.  Single-fold will allow you to fold over a raw edge to the inside of a garment to finish the edge, but generally you will not see any bias tape on the exterior of the garment.  I like to use double-fold for most things.

Here is an example of how to sew double-fold bias tape to encase an armhole on a vintage pillow case dress:

Open up your double-fold bias tape.  If you look very closely you will see that one side has a larger fold than the other.  This is a very important detail to notice before you sew on your bias tape.

Open up the fold on the smaller side. When getting ready to encase an arm hole, you want to line up the raw edge of the garment with the raw edge of the smaller fold of the bias tape.  Pin this in place on the right-side of the garment.  So as you can see above, you will need to unfold the double-fold tape quite a bit for this step to work.  The larger fold will remain folded over.

Stitch in the fold along the raw edge of both the bias tape and the garment.  Sew on the right-side of the garment.

Here (picture above) is what your bias tape will look like once you have stitched in the fold towards along the side with the smaller fold.

Next fold your bias tape over to the other side (wrong-side of the garment).  If you notice in the picture above, the bias tape on the underside is ever so slightly wider than the top.  This is exactly what you want.

Now stitch as close to the edge of the bias tape as possible on the top side (smaller fold).  Stitching on this side will ensure that you will catch the larger fold (on the other side) and have perfect looking bias tape every time!  Important to note:  You stitched your original line of stitching on the right-side of the garment and you are doing your second set of stitching on the same side (right-side) of the garment.

 

I used the double-fold bias tape technique on this vintage pillowcase dress arm hole.  Using this method, I have no trouble sewing perfect bias tape every time!

You can use bias tape to encase any raw edge of a sewing project or simply use it to add a pop of color and style.  Try it on the bottom edge of a skirt, the bottom of a dish towel for some added decorative detail, or on the edge of a pocket.

Single-fold bias tape works very similarly to double-fold.  The only difference is that when you fold over your bias tape to the wrong-side of the garment there will be nothing left on top (you won’t see the bias tape from the right-side of the garment).  Instead you will just see a line of stitching on the fabric where you have sewn your single-fold bias tape to the wrong-side of the garment.  Personally I find double-fold bias tape to be easier and have a cleaner, more finished look, but use whatever your pattern or design calls for.

Once you master sewing bias tape, you will feel like you have come along way as a beginning sewer.  Honestly, I used to dread sewing bias tape, but now it is a piece of cake!  Don’t let bias tape scare you, it can be a lot of fun and I will show you how to add your own special flare to projects in Sew Basics: Bias Tape (part 2).

Cottage Mama’s Note:  If you have any questions, please email me at [email protected] and I am happy to help.  We have lots of fun talking “sewing” over on The Cottage Mama facebook page, so come on over and join in the fun!